IBM MANAGEMENT SITEPROTECTOR ES750 - Manual (Page 2)

Getting Started
This card provides connection and initial configuration information for the IBM Proventia ® Network Enterprise Scanner
Model ES750 appliance. You will find more advanced configuration information in the IBM Proventia Network Enterprise
Scanner User Guide available on the Web at
www.iss.net/support/documentation .
Configure Basic Settings
A. Gather Materials
• IBM Proventia Network Enterprise Scanner with appropriate updates (consult product ReadMe file)
• A laptop computer (or mobile desktop)
• A terminal emulator installed on your laptop (for example, HyperTerminal included with Windows)
• A serial cable (RJ45 to DB9) included in box
• One power cord
• IBM Proventia ® Management SiteProtector ™ Server 2.0 SP6 with appropriate updates (consult product ReadMe file)
B. Consult your networking team for the following:
• Appliance hostname ___________________
• Static IP address for the Management port ___________________
(Use to browse to the appliance and for communications with SiteProtector.)
• Static IP address for the Scan port ___________________
• Your DNS search path ___________________
• DNS server names ___________________
• IP address of your Default Gateway
Management port ___________________
Scan port ___________________
• Administrative username and password that is used to manage SiteProtector
• Username ___________________
• Password ___________________
• Name, IP address and credentials of the Agent Manager (a component of SiteProtector) with which Enterprise
Scanner is to communicate
• Name ___________________
• IP address of the Agent Manager ___________________
• Any credentials for the Agent Manager ___________________
• Time zone for the location where the appliance will be installed
C. Definitions
• Root Username = root
• Root password = admin
• Defining root – This username and password is used to log into the Linux kernel of the appliance.
(Most users will never do this.)
• Administrative Username = Admin and Password = Admin
• The administrative user is the log in credentials for the Proventia setup wizard
• Proventia Manager Username = ___________________ Password= ___________________
Connect the Cables
A. Connect power cord.
B. Connect the Management Port (static IP) to your network by means of a router/switch.
C. Make sure you can access an operational Proventia Management SiteProtector system, and that
your system is at the latest SiteProtector Database Service Pack Release.
D. Connect the laptop to the same network as the appliance using the Ethernet adaptor on the laptop
and a standard Ethernet cable.
E. Connect the laptop Serial Port/com 1 to the RJ45 serial port on the appliance using the cable
provided within the box.
F. Connect Scan Port to the network to be scanned.
Run the Terminal Emulator and Connect to the Appliance
A. Start the terminal emulator (VT100).
B. Set the following:
• Communications Port = Com 1 or the appropriate cable connection port
• Communications baud rate = 9600
• Data bits = 8
• Parity = “none”
• Stop bits = 1
• Flow control = hardware
Quick Tip: Use your arrow keys on the keyboard to navigate up/down/left/right within the
emulator. Use the space bar to select/deselect.
Run the Proventia Setup Wizard
A. Follow the onscreen instructions for configuring the appliance. Keep in mind the following steps.
B. To login to the Setup Wizard, use the following: Username: admin; Default Password: admin
C. The management interface (eth0) will be the IP address you will use to browse to the appliance from
your laptop in future steps.
D. The management interface is also the IP address that SiteProtector will use to connect to the appliance.
Quick Tip: Enter keystrokes slowly for the time zone as the Wizard caches keystrokes.
1
2
3
4
Continued on reverse >