Ikelite Digital Camera Housing SLR-DC - Manual (Page 25)

A full range of accessories are available to support your housing. Please visit
www.ikelite.com to see the most current information about recommended
accessories for your housing.
EV-Controller Use
TTL flash control is not available when using an EV-Controller, and
therefore an EV-Controller is not recommended for use with this
housing.
Note: The EV-Controller cannot be used as a slave. If hardwired to the
housing, set the EV-Controller to Non pre-flash.
The EV-Controller used with Ikelite DS Substrobes has two user
settings. One setting is for strobe selection, the other is for pre-flash “P”
or non pre-flash “ P .” Most cameras use a pre-flash. This means the
EV-Controller should be set to the pre-flash “P” position when used with
this camera as a slave. If a manual mode is used that does not emit a
pre-flash, set the EV-controller to the non pre-flash “ P ” position.
25
Recommended Accessories
Accessory Mounting Points
The top of the SLR-DC housing features a 1/4-20 threaded mounting
point for the attachment of a focus light, video light or other lightweight
accessories. DO NOT attach heavy items to this mount and always use
the correct length screw to attach a component.
The bottom of the SLR-DC housing tray also features five
1/4-20 threaded mounting points for attachment of a tripod or other
accessories.