Intelligent Motion Systems UDAS-1001E - Manual (Page 30)

Checking the System
3-6
3.3.2.2 3.3.2.2 Analog Output Test Analog Output Test
The analog output test controls the voltage on the analog output channels of the UDAS unit.
In the UDAS SYSCHECK Test Category Selection Window, click the Analog Out button and the
UDAS SYSCHECK ANALOG OUTPUT dialog shown in FIGURE 3.4, UDAS SYSCHECK Analog
Output Test of a UDAS unit opens.
In the Channel 0 and Channel 1 fields, click to insert the cursor and enter the desired value (volts
or counts) in any of the four data entry fields.
After replacing the old value with a new value, press the Enter key to update both analog outputs
from the UDAS unit.
Clicking the Disable Outputs check box grounds both of the analog output channels.
FIGURE 3.4 UDAS SYSCHECK Analog Output Test of a UDAS unit