Impex PM-3000 - Manual (Page 12)

STEP 4 (See Diagram 4)
A.) Attach the Seat Support (#1) to the Vertical Frame (#3). Secure it with two M10 x 3 ¾”
Carriage Bolts (#48), one 4 3/8” x 1 ¾” Bracket (#13), two Ø ¾” Washers (#60), and two M10
Aircraft Nuts (#62).
B.) Attach the Leg Developer (#7) to the open bracket on Seat Support. Secure it with the Leg
Developer Axle (#34), two M10 x 5/8” Allen Bolts (#53), and two Ø ¾” Washers (#60). Do not
over tighten the Bolts. Make sure the Leg Developer is able to swivel.
C.) Place the Seat Bracket (#42) onto Seat Support. Place the Seat Pad (#17) onto Seat
Support and Seat Bracket. Secure the Seat Pad with two M8 x 3 3/8” Allen Bolts (#56)
through Seat Support, two M8 x 5/8” Allen Bolts (#58) through Seat Bracket, and four Ø 5/8”
Washers (#61).
DIAGRAM 4
11