Icom VHF MARINE TRANSCEIVER IC-M501EURO - Manual (Page 13)

3
BASIC OPERATION
9
■ Call channel programming
The call channel switch can be programmed to your most
often-used channels in each channel group for quick recall.
q While pushing [HI/LO], push [DIAL] one or more times to
select the desired channel group (International, U.S.A.,
Holland, ATIS, DSC) to be programmed.
w Push [CALL] for 3 sec. to enter the call channel program-
ming condition.
• Channel number starts flashing.
e Rotate the channel selector to select the desired channel.
r Push [CALL] to program the displayed channel as the call
channel.
• Push [DIAL] to cancel.
• The channel number stops flashing.
■ Channel names
Memory channels can be tagged with alphanumeric names
of up to 10 characters each.
Capital letters, small letters, numerals, some symbols (! " # $
% & ' ( )
✱ + , – . ⁄) and spaces can be used.
q Select the desired memory channel.
• Cancel dual watch, tri-watch or scan in advance.
w While pushing [HI/LO], push [CALL] to edit memory chan-
nel name.
• A cursor appears and blinks.
e Select the desired character by rotating the channel selec-
tor or by pushing [Y]/[Z] on the microphone.
• Push [SCAN] or [DIAL] for cursor movement.
r Push [CALL] to input and set the name.
• The cursor disappears.
t Repeat steps q to r to program another memory channel
names, if desired.
INT
25W
TAG
äLEASURE
INT
25W CALL
DUP TAG
INTL
INT
25W CALL
TAG
CALLING
0 IC-M501EURO_3.qxd 03.7.29 15:26 Page 9