InFocus C170 User Manual

Page 33

Advertising
background image

33

Advanced settings

Sharpness

: (video sources only) changes the clarity of the edges of a video

image. Select a sharpness setting.

Color Space

: This option applies to computer sources. It allows you to

select a color space that has been specifically tuned for the video input.
When Auto is selected, the projector automatically determines the standard.
To choose a different setting, turn off Auto, then choose RGB for computer
sources, choose either REC709 or REC601 for component sources.

Color Temperature

: changes the intensity of the colors. Select a listed

value.

Color Control

: allows you to individually modify each color. Highlight the

color, press Select, then use the arrows to adjust the value.

Video Standard

: (video sources only) When it is set to Auto, the projector

attempts to pick the video standard automatically based on the input signal
it receives. (The video standard options may vary depending on your region
of the world.) If the projector is unable to detect the correct standard, the
colors may not look right or the image may appear “torn.” If this happens,
manually select a video standard by selecting NTSC, PAL, or SECAM from
the Video Standard menu.

Overscan

: (video sources only) removes noise around the video image.

Sync Threshold Adjust

: (enhanced and high definition sources only) If a

hardware device, such as a DVD player, is not syncing properly with the
projector, select this option to help it sync.

The following 4 options are for computer and component sources only.

Phase

: adjusts the horizontal phase of a computer source.

Tracking

: adjusts the vertical scan of a computer source.

Horizontal/Vertical Position

: adjusts the position of a computer source.

White Peaking

: (video sources only) adjusts the white level processed in

the image. It increases the brightness of whites that are near 100%.

Sharpness

Advanced

Color Space

Color Temperature

Color Control

Video Standard

Advertising