ICP DAS USA Compact Embedded Controller LinCon-8000 - Manual (Page 13)

5.4 Controller cover
For safety and the controller setting memo, the LinCon-8000 provides a main
controller cover to protect the reset push button applied under the uncontrolled
situation. And it also offers an expansion slot setting record area and others
configuration memo areas. The operation procedure is provided below:
Step 1: Use your hand to push the main controller cover loose and pull-
down the cover.
Step 2: Open the cover, as shown in the below figure below.
The Expansion I/O setting record is located directly on the main controller unit.
The memo area is on the inside cover, as can be seen below. Note that the reset
key is on the top-right corner protected by the controller cover.
(a) (b)
LinCon8000 Series Hardware user’s Manual, July/2003, v1.0 ----- 13