Front & rear panels —continued – Integra DPS-5.4 User Manual

Page 14

Advertising
background image

14

Front & Rear Panels—Continued

A

IR IN/OUT (21)

The IR IN connector can be used to connect a com-
mercially available IR receiver, which can be used
to pickup signals from the remote controller when
the DPS-5.4 is located in another room, installed in
a rack, or is out of range of the remote controller
The IR OUT connector can be used to connect a
commercially available IR emitter, which can be
used to pass remote controller signals received by
the IR IN along to other AV components.

B

OPTICAL DIGITAL AUDIO OUTPUT [19]

This optical digital audio output can be connected
to an optical digital audio input on a hi-fi amp, AV
receiver, or surround sound decoder (Dolby Digital,
DTS).

C

COAXIAL DIGITAL AUDIO OUTPUT [19]

This coaxial digital audio output can be connected
to a coaxial digital audio input on a hi-fi amp, AV
receiver, or surround sound decoder (Dolby Digital,
DTS).

D

jacks [20]

These

(Remote Interactive) connectors can be

connected to the

connectors on your other Inte-

gra/Onkyo AV components for interactive control.
For remote control operation, you must make an
analog RCA/phono connection between your DPS-
5.4 and the other AV component, even if they are
connected digitally.

E

ANALOG AUDIO OUTPUT [18]

These RCA/phono connectors can be connected to
the analog audio inputs on your TV, hi-fi amp, AV
receiver.

F

RS 232

This RS-232 port can be connected to an external
controller.

G

COMPONENT 2 VIDEO OUTPUT [19]

These BNC connectors can be used to connect
a TV or projector with BNC component video
inputs.

H

COMPONENT 1 VIDEO OUTPUT [19]

These RCA/phono connectors can be used to con-
nect a TV, projector or AV receiver with component
video inputs.

I

VIDEO OUTPUT [18]

These RCA/phono connectors can be used to con-
nect TVs, projectors or AV receivers with composite
video inputs.

J

S VIDEO OUTPUT [19]

These connectors can be used to connect TVs or
projectors with S-Video inputs.

K

AC INLET [22]

The supplied power cord is connected here. The
other of the power cord should be connected to a
suitable wall outlet.

Rear Panel

1 2

4

3

5

6

7

8

9J

K

Advertising