IBM F50 RS/6000 7025 - Manual (Page 101)

Set Privileged-Access Password: The privileged-access password protects against
the unauthorized starting of the system programs.
If you previously had set a privileged-access password and want to remove it, select
Remove Privileged-Access Password.
Note: If you forget your password, you have to shut down the computer and
remove the battery for at least 30 seconds to disable the password. See
Appendix B, “Replacing the Battery” on page B-1 for details.
Audio: Selecting this utility turns on or off the system tones heard at power-on
time.
Remote Initial Program Load Setup: This option allows you to enable and set
up the remote startup capability of your computer. First, you are asked to specify the
network parameters.
Network Parameters
1. IP Parameters
2. Adapter Parameters
3. Ping
.------.
|X=Exit|
------'
===>
Note: Some applications may require that IP addresses contain leading zeroes for
numbers less than 100. For example, 129.132.4.20 may need to be entered as
123.132.004.020.
Chapter 3. System Management Services 3-33