Insignia NS-C5111 User Manual

Page 17

Advertising

NS-C5111 Car Deck

www.insignia-products.com

Listening to radio

To listen to the radio:

1 Press the

MODE

button on your car deck or remote control one or

more times until

TUNER

appears on the LCD. The currently

selected radio frequency appears of the LCD.

2 Press the

BD/ENT/SUB

button on your car deck or the

BAND/ENTER

button on your remote control one or more times to

select the radio band you want. You can select:
•

FM1

•

FM2

•

FM3

•

AM1

•

AM2

3 If you want to manually select a station, press and hold the

button on your car deck or remote control for more than one

second. You car deck tunes to the next available station. Press
one of the buttons again to go to another station.

4 If you want to scan for a station, press and release the

button. Your car deck goes to the next available station and plays
the station for two seconds, then it goes to the next station. When
you hear the station you want, press the same button again to stop
the scan and play the station.

5 If you want to listen to a station assigned to a preset, press the

preset button on your car deck or remote control.

Setting up presets

You can assign a radio station to one of the preset buttons. When you
want to listen to the assigned station, press the preset button for that
station.

To set up a preset: