AEG SKD71800F0 User Manual

Page 15

Advertising
background image

Problem

Possible cause

Solution

The appliance has no power.

There is no voltage in the mains

socket.

Connect a different electrical ap-

pliance to the mains socket.

Contact a qualified electrician.

The lamp does not work.

The lamp is in stand-by.

Close and open the door.

The lamp is defective.

Refer to "Replacing the lamp".

The compressor operates

continually.

The temperature is not set cor-

rectly.

Set a higher temperature.

The door is not closed correctly. Refer to "Closing the door".

The door has been opened too

frequently.

Do not keep the door open lon-

ger than necessary.

The product temperature is too

high.

Let the product temperature de-

crease to room temperature be-

fore storage.

The room temperature is too

high.

Decrease the room temperature.

The compressor does not

start immediately after

pressing the COOLMATIC

switch, or after changing

the temperature.

This is normal, no error has oc-

curred.

The compressor starts after a pe-

riod of time.

Water flows on the rear

plate of the refrigerator.

During the automatic defrost-

ing process, frost defrosts on

the rear plate.

This is correct.

Water flows into the re-

frigerator.

The water outlet is clogged.

Clean the water outlet.

Products prevent that water

flows into the water collector.

Make sure that products do not

touch the rear plate.

Temperature cannot be

set .

COOLMATIC function switched

on.

Switch off COOLMATIC manually,

or wait to set the temperature

until the function has reset auto-

matically. Refer to "COOLMATIC

function"..

The temperature in the ap-

pliance is too low/high.

The temperature regulator is

not set correctly.

Set a higher/lower temperature.

The door is not closed correctly. Refer to "Closing the door".

The product temperature is too

high.

Let the product temperature de-

crease to room temperature be-

fore storage.

Many products are stored at

the same time.

Store less products at the same

time.

The temperature in the re-

frigerator is too high.

There is no cold air circulation

in the appliance.

Make sure that there is cold air

circulation in the appliance.

What to do if…

15

Advertising
This manual is related to the following products: