InFocus 4805 User Manual
Page 38
37
Video Standard
: when it is set to Auto, the projector attempts to automati-
cally pick the video standard based on the input signal it receives. (The
video standard options may vary depending on your region of the world.) If
the projector is unable to detect the correct standard, the colors may not
look right or the image may appear “torn.” If this happens, manually select
a video standard by selecting NTSC, PAL, or SECAM from the Video Stan-
dard menu.
Overscan
: (video sources only) removes noise around the video image.
Sync Threshold Adjust
: If a hardware device, such as a DVD player, is not
syncing properly with the projector, select this option to help it to sync
when connected to the projector.
The following four (4) options are for computer sources only.
Phase
: adjusts the horizontal phase of a computer source.
Tracking
: adjusts the vertical scan of a computer source.
Horizontal/Vertical Position
: adjusts the position of a computer source.
White Peaking
: increases the brightness of whites that are near 100%.
Video Standard
SP4805-01_usrguide.fm Page 37 Monday, April 19, 2004 10:10 AM