IMC Networks FiberLinX - Manual (Page 22)

WARNING! Integrated circuits and fiber optic components are extremely
susceptible to electrostatic discharge damage. Do not handle these
components directly unless you are a qualified service technician and use
tools and techniques that conform to accepted industry practices.
3) Hold boards by the edges only; do not touch the electronic components
or gold connectors.
4) After removal, always place the boards on a grounded, static-free
surface, ESD pad or in a proper ESD bag. Do not slide the board over
any surface.
Unit Specifications
Environmental
Operating Temperature: 32° - 104° F (0° - 40° C)
Storage Temperature: 21° - 160° F (-6° - 71° C)
Humidity: 5 - 95% non-condensing
Power
AC Input Load: 100/240V ~ 50/60 Hz, 0.2/0.1A (stand-alone chassis)
Heat
Heat generated: 50 BTU/hr.
Fiber Optic
For fiber optic specifications, please visit the IMC Networks Web site at
www.imcnetworks.com/fopower.htm.
5.2