iLive IS809B - Manual (Page 11)

CUSTOMER HELPLINE | 1-314-621-2881 iLive | IS809B 11
OPERATIONS
Resetting the Unit
Left / Right / Mono Speaker Settings Docking an iPod
Playing a Docked iPod
Resetting the base station is the quickest and most
effective way to solve small unexpected problems
with the base station’s behavior.
1. Using a paperclip or like object, press the
Reset button to reset the base station to it’s
original settings.
Please note, resetting the base station will not
unpair any of the wireless speakers from the
bast station.
1. Locate the numbered bracket that fits the iPod
that will be docked.
Each included Bracket has a number on it,
indicating which iPod model that bracket is
compatible with. See the separate bracket
chart page to identify which bracket is needed.
2. Snap the bracket into place over the iPod
connector in the Dock for iPod.
3. Connect the iPod to the iPod connector.
When the unit is plugged in, using AC power,
the docked iPod will charge.
The wireless speakers can be set to Left, Right, or
Mono by using the Left/Right/Mono dial on the
wireless speaker.
When placing multiple wireless speakers in close
proximity to one another, set half of the speakers
to Left and the other half to Right. This will create
a stereo audio output.
When a single wireless speaker is set in a location,
adjust the Left/Right/Mono dial to Mono.
Note: The wireless speakers need to be paired with
the unit before any audio can be heard. See page 9
for wireless speaker pairing instructions.
1. Press the Power button to turn the base station
on.
2. Press the Source button to switch to iPod
mode.
3. Press the Play/Pause button to play or pause
the docked iPod.