I/O Magic MagicSpin - Manual (Page 3)

Notice: I/OM AGIC Corporation makes no warranty of any kind with regards to this material, including, but
not limited to, the implied warranties of merchantability and fitness for a particular product.
I/OM
AGIC Corporation shall not be liable for errors contained herein or for incidental
consequential damages in connection with the furnishing, performance, or use of this material.
Every effort has been made to ensure that the information in this manual is accurate. I/OM
AGIC
Corporation is not responsible for printing or clerical errors.
Mention of third party products is for information purposes only and constitutes neither an
endorsement nor a recommendation. I/OM
AGIC Corporation assumes no responsibility with
regards to the performance of these products.
This document contains proprietary information which is protected by copyright (see below).
The information contained in this document is subject to change without notice.
Trademarks: Microsoft is a registered trademark of Microsoft Corporation. Windows, Windows 95/98 and the
Windows 95/98 logo are trademarks of Microsoft Corporation. IBM is a registered trademark of
International Business Machines Corporation. All other trademarks and product names used within
this manual are the property of their respective companies and are hereby acknowledged.
Copyright: ©1998 I/OM AGIC Corp. all rights reserved. No part of this publication may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language or computer
language, in any form, by any means, without prior written consent of I/OM
AGIC .
Warranty: I/OM AGIC Corporation warrants that the products it sells will be free from defects in materials
and workmanship. Consult the warranty card for complete warranty information.
FCC Notice: This equipment has been tested and found to comply with the limits for a class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio-frequency energy. If not installed and used in accordance with the instructions, it
can cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
on and off, the user is encouraged to try to correct the interference by one or more of the
following measures:
•
If it can be done safely, reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and the receiver.
•
Connect the equipment to an outlet on a different circuit from the receiver.
•
Consult the dealer or an experienced radio/TV technician for help.
This equipment has been certified to comply with the limits for a class B computing device,
pursuant to part 15 of the FCC rules.
Only peripherals (Computer input/output devices, terminals, printers, etc.) certified to comply to
the class B limits may be attached to this computer. Operation with non-certified peripherals is
likely to result in interference to radio and TV reception.
To meet FCC requirements, shielded cables and power cords are required to connect the device
to a personal computer or other Class B certified device.
The user is cautioned that changes and modifications made to the equipment without the
approval of manufacturer could void the users authority to operate this equipment.