IOGear BOSS GNS1000 - Manual (Page 37)

If you get several fixed IP addresses from your
ISP and the ISP restricts the bandwidth for each
fixed IP address, you have to prevent the network
packets from always sending on the same IP
address and the other IP address to sit idle.
Multiple NAT solves this and allows you to
increase the bandwidth. Multiple NAT allows you to
dispatch your network packets evenly to these IP
addresses provided by ISP.
1. Enter the Internal IP Range 1, e.g.
“192.168.2.1/24”. It means the network is
“192.168.2.XXX”
2. Enter the External IP Range 1, the IP address
range you get from your ISP.
3. Enter the Internal IP Range 2, e.g.
“172.16.2.1/24”. It means the network is
“172.16.2.XXX”.
4. Enter the External IP Range 2, the IP address
range you get from your ISP.
35
4.3 Multiple NAT
Network Settings