Insignia NS-3099 - Manual (Page 8)

7
NS-3099 Speaker System
www.insignia-products.com
Using your speaker system
Basic operation
To use your speaker system:
1 Connect the speakers to the subwoofer and the audio source.
2 Plug the AC power adapter into a standard AC power outlet.
3 Plug the AC power adapter cord into the power connector on the
subwoofer.
4 Press the On/Off button on the right satellite speaker to turn on the
speaker system. The panel will light.
5 Adjust the master volume control down.
6 Turn on the audio source.
7 Adjust the master volume control to a comfortable level.
8 Adjust the bass volume control to the desired level.
9 Press the On/Off button again to turn off the speaker system.
Troubleshooting
Use the following checklist for troubleshooting if you have problems
with your speaker system. Many problems are the result of incorrect
adjustments, or problems with the audio source. See your authorized
service center if problems persist. Make sure that all connections are
correctly made when using with other equipment.
Maintaining
Cleaning the speaker enclosures
Wipe the enclosures with a clean, dry, soft cloth. Never use a solvent
or alcohol. Do not spray insecticide liquid near the speakers. Such
chemicals may cause damage and discoloration to the exposed
surfaces.
Problem Solution
No power • Make sure that the AC power adapter is connected to an
AC power outlet.
• Make sure that the power is turned on.
No sound • Make sure that the AC power adapter is connected to an
AC power outlet.
• Make sure that all cable connections are correct.
• Make sure that the audio source is turned on, operating,
and not muted.
• Try another audio source.
• Turn the master volume control up.
• Make sure that the speakers are not muted because
headphones are plugged into the speaker system.
NS-3099 Speaker System - A5.fm Page 7 Tuesday, April 11, 2006 5:42 PM