Appendix – IOGear GUWAVKIT User Manual
Page 72
72
73
I. Compatibility with IOGEAR Wireless USB Hub and Adapter Kit (GUWH104KIT)
Important: To retain the functionality of both the Wireless Audio / Video Kit and the GUWH104KIT, you
MUST follow these steps:
Uninstall the GUWH104KIT software by using Add/Remove Programs or Programs and Features on
1.
the Control Panel. Please select and remove “Ultrasuite with WiCenter Basic”. The Wireless Audio /
Video Kit installer will not allow you to proceed until this software is removed.
Complete the installation of the Wireless Audio / Video Kit as shown in the Wireless VGA Software
2.
Installation section.
Install the GUWH104 software “Driver Hub Only” for your Wireless USB Hub from IOGEAR
3.
website. Please make sure that you are in the correct product page.
http://www.iogear.com/support/dm/driver/GUWH104#display
Use the Wireless USB Host Adapter (GUWA200) that comes with this kit to communicate with your
4.
Wireless USB Hub.
Note: After this upgrade, the Wireless USB Host Adapter (GUWA100U) will not function with the
Wireless VGA Receiver (GUW2015V) or the Wireless USB Hub (GUWH104) on the PC system
where the GUW2015VKIT software has been installed. However you may use this Wireless USB
Host Adapter (GUWA100U) on a different PC.
For more support information, please contact IOGEAR.
Appendix