Insignia ns-s6501 6.5'' car stereo speakers, Introduction, Safety information – Insignia NS-S6501 User Manual

Page 3: Features, Included, Dimensions, Troubleshooting

Advertising
background image

3

www.insignia-products.com

Insignia NS-S6501

6.5'' Car Stereo

Speakers

Introduction

Congratulations on your purchase of a
high-quality Insignia product. Your NS-S6501
Car Stereo Speakers represent the state of the
art in car speaker design, and are designed for
reliable and trouble-free performance.

Safety information

This

User Guide

contains important

instructions for your safety. Make sure that
you refer to it.

Do not install the speakers where they may
be subjected to excessive heat, moisture, or
dust, or where they will be kicked repeatedly,
brushed, or bumped.

To prevent a short circuit, never leave any
metal objects, such as coins or metal tools,
inside the acoustic system.

Make absolutely sure that the positive (+) and
negative (-) terminals of the speakers are
connected to the correct outputs from the
music source.

Never run the wiring on the outside of, or
under, the vehicle, where it can be damaged
by road hazards or moving parts of the
vehicle. Use existing wire channels, sills,
panels, and moulding strips inside the vehicle
to hide the wiring for safety and a neat
appearance.

When your speakers are connected, turn on
the various components and slowly turn up
the volume. Make sure that you check and
double-check all connections to insure
correct installation and use.

Do not overload the speakers beyond their
nominal power handling capacity.

Keep recorded tapes, watches, and personal
credit cards using magnetic coding away
from the speakers to protect them from
damage caused by the magnets in the
speakers.

If you cannot find an appropriate mounting
location, consult your car or sound system
dealer before mounting.

Features

Included:

6.5'' speakers (2)

Speaker wire

mounting leads

Mounting screws (8)

Mounting clips (8)

Dimensions

Troubleshooting

Always test the speakers and speaker wires.
Make sure that the speakers are connected with
the correct polarity (positive (+) amplifier output
to positive (+) speaker terminal and negative (-)
amplifier output to negative (-) speaker terminal).

Warning

Before mounting the speakers and connecting
the wires, make sure that the negative battery
cable is disconnected from the battery. Failure
to do this may cause a short circuit or fire.

Use extreme caution when working near the
gas tank, gas lines, or hydraulic lines with
electrical wiring.

45°

7.09 in (180 mm)

6.22 in (158 mm)

5.02 in
(127.5 mm)

3.15 in
(80 mm)

2.05 in
(56 mm) 1.61 in

(41 mm)

0.16--.18 in
(4-4.5 mm)

Advertising