Integra DPS-9.1 - Manual (Page 20)

20
DPS-9.1 US_E 29343004
Display
Video Circuit
O f f
Play Stop Open /Close
Standby/On
Standby
Power
On O f f
96 / 88.2 48 /44.1 192 /176.4
Sampling Rate ( @ @ ) kHz
PROGRESSIVE SCAN
48/44.1 96/88.2 192/176.4
Source DVD Optical Coaxial External Input Open/Close
Display Video Circuit Off
48/44.1 96/88.2 192/176.4
DVD
Playing DVD-Video/Audio,
Video CD, and CD
Basic Playback
Before playing
• DVD-Video, DVD-Audio, Video CD, CD, CD-R and CD-RW can be played with the DVD Player (see
“Playable Discs” on page 6). Do not play anything else.
• When playing DVD-Video, Video CD, or DVD-Audio with video features, turn on the TV and set the TV
to the DVD Player's input.
• If an audio system is connected to the DVD Player, turn on the audio system and set it to the DVD
Player’s input.
About the
DVD-V
,
DVD-A
,
VCD
and
CD
marks in the pages related to disc operation
DVD-A means the function or title is related to DVD-Audio operation.
DVD-V means the function or title is related to DVD-Video operation.
VCD means the function or title is related to Video CD operation.
CD means the function or title is related to audio CD operation.
1
Press Open/
Close.
The disc tray opens.
3
Press Play.
The disc tray closes and playback starts.
If you press Open/Close to close the tray after step
2 ,
playback may automatically start depending on the disc.
The appropriate disc indicator lights, and the audio
sampling rate indicator also lights.
For the other information that appears in the display,
see page 35.
If the DVD Player is in standby mode
when the button is pressed
The DVD Player turns on and the disc tray opens.
In this case, it takes several seconds until the disc
tray opens.
2
Place a disc on the disc tray.
Warning
If the DVD Player is connected to the TV or
amplifier through the analog audio jacks, do not
play DTS-encoded discs. Excessive noise may
be output from the analog stereo jacks, which
may damage the connected equipment.
To reproduce DTS surround sounds, digital
connection to an amplifier with a DTS decoder
is needed.
Put the disc in the tray with the label
side facing up.
There are two different disc sizes.
Place the disc in the correct guide on
the disc tray.
CAUTION
Keep your fingers well clear of the disc tray as it is closing.
Neglecting to do so may cause serious personal injury.
Whenever a disc is loaded in the
player, Stop and Play are highlighted.
VCD CD DVD-A DVD-V
DPS-9.1(US_E)p20-26.p65 10/11/00, 18:58 20