IBM MOBILE COMBO ADAPTER PRO/100 SP - Manual (Page 34)

Units: seconds
S10 Automatic Disconnect Delay
This register sets the length of time, in tenths of a second, that the modem
waits before hanging up after a loss of carrier. This allows for a temporary
carrier loss without causing the local modem to disconnect.
The actual interval the modem waits before disconnecting is the value in
register S10.
Range: 1-254
Default: 20
Units: .1 seconds
S11 DTMF Dialing Speed
This register determines the dialing speed which is prefixed for each country.
Range: 50-150
Default: 95
Units: .001 seconds
S12 Escape Guard Time
This register sets the value (in 20 ms increments) for the required pause after
the escape sequence (default 1 s).
Range: 0-255
Default: 50
Units: .02 seconds
S14 General Bit Mapped Options Status
Indicates the status of command options. Only bit 3 and bit 6 are used,
read-only.
Bit 3 Result codes (Vn)
B-8 Intel
®
PRO/100 SP Mobile Combo Adapter: User’s Guide