IOGear MINIVIEWTM MICRO GCS62 - Manual (Page 10)

1
2
3
Before you begin, please turn off the computers you are going to connect to the MiniView™ Micro.
NOTE: to prevent damage to your equipment due to static electric discharge, please make sure that all
devices on the installation are properly grounded.
1. Connect your monitor VGA cable to the
female VGA port (item# 1) on your
MiniView™ Micro.
2. Connect your PS/2 keyboard directly
into the PS/2 keyboard port (item# 2)
on your MiniView™ Micro.
3. Connect your PS/2 mouse directly into
the PS/2 keyboard port (item# 3) on
your MiniView™ Micro.
Step. 1
Installation
7