Iin ntteerrcch haan nggeeaabbllee h haan nddlleess, Rreeppllaacceem meen ntt ppaarrttss, Iin ntteerrcch haan nggiin ngg m mo oddeellss – Ikelite RCD H User Manual

Page 4

Advertising
background image

I

IN

NTTEERRCCH

HAAN

NGGEEAABBLLEE H

HAAN

NDDLLEESS

Only the Super-8 and 8R feature interchangeable handles and both the lantern grip and pistol

grip handles are supplied. To change the handle, access the screw underneath the locking lever by

first sliding the locking lever out and then flip the lever up.

Remove the screw and washer and then slide the handle out of the body. Slide the other handle

into the groove and secure with the screw and washer.
N

NO

OTTEE:: Ikelite's black vinyl lanyard is NOT recommended for use with RCD Super-8/8R. The vinyl

lanyard is designed to be broken in an emergency and the weight of the Super-8/8R may cause the

lanyard to break during normal use.

R

REEPPLLAACCEEM

MEEN

NTT PPAARRTTSS

AA--EE

99001122..22

Head assembly complete with bulb: H

AA--EE

99001122..1188 Head assembly complete with bulb: HR

AA--EE

99001122..8888 Head assembly complete with bulb: Super-8

AA--EE

99001122..9966 Head assembly complete with bulb: Super-8R

AA

00550011

Rubber shroud: all models

BB

99001122

Head with hydrogen absorber: H

BB

99001122..1177 Head with hydrogen absorber: HR

BB

99001122..8800 Head with hydrogen absorber: Super-8

BB

99001122..9955 Head with hydrogen absorber: Super-8R

CC

00004422..5555 H BULB, IKE4 5.0V halogen, standard higher intensity

C

0040.18 HR BULB, 4.7V halogen

CC

00004422..5588 Super-8 BULB, IKE8 10.4V halogen

CC

00004422..2200 Super-8R BULB, 6V halogen

D

D

99001122..33

Bulb holder/contact bar: H and Super-8

D

D

99001122..3388 Bulb holder/contact bar: HR and Super-8R

EE

00112233

O-ring: all models

FF

99001133

Ni-cad battery module: HR

FF

99001133..88

Ni-cad battery module: Super-8R

00008833..99 Charger, USA 110/220V 6-hour
00008833..9911 Charger, Euro 220V 6-hour

GG

99001122..55xx Body assembly with toggle: note color H and HR

GG

99001122..88xx Body assembly with toggle: note color Super-8 and 8R
00991100

Hydrogen absorber

77

I

IN

NTTEERRCCH

HAAN

NGGIIN

NGG M

MO

ODDEELLSS

RRCCD

D H

H aanndd H

HRR

The HR front head assembly is modified for the rechargeable light which means it is NOT

interchangeable with the 4-cell alkaline version RCD. Only the body assembly is interchangeable

between the H and HR models.
SSU

UPPEERR--88 aanndd 88RR

The Super-8R front head assembly is modified for the rechargeable light which means it is NOT

interchangeable with the 8-cell alkaline version Super-8. Only the body assembly is interchangeable

between the Super-8 and 8R models.

M

MAAIIN

NTTEEN

NAAN

NCCEE__________________________________________________________________________________________________________________________________

1. We suggest storage of your lite with the locking lever OPEN to allow any potential hydrogen/air

mixture to escape.

2. The inner ledges of the lite body and front assembly are the sealing surfaces. DO NOT allow

these surfaces to become damaged.

3. Keep the o-ring and sealing surfaces clean. DO NOT stretch the o-ring when cleaning. It is not

necessary to lubricate the o-ring. Never use spray lubricant because it will cause cracking of

the plastics.

4. Occasionally clean the metal contacts for a better connection.
5. The front head assembly has been factory sealed; DO NOT disassemble.

CCAAU

UTTIIO

ON

N____________________________________________________________________________________________________________________________________________

DO NOT use batteries that have been wet; batteries from a flooded lite should be discarded.

Water could create an internal short circuit at some later date causing a potential explosion. The

normal evolution of all batteries is emitting hydrogen gas. This gas must be absorbed or allowed to

escape to prevent ignition of the entrapped hydrogen/air mixture. We suggest storage of your lite

open to allow any hydrogen/air mixture to escape. A hydrogen absorber has been concealed inside

this lite and should NOT be removed. In case the lite floods, install a new hydrogen absorber in the

spare bulb holder and replace the batteries.

IIKKEELLIITTEE LLIIM

MIITTEED

D W

WAARRRRAAN

NTTYY________________________________________________________________________________________________________

All Ikelite products are warranted against any manufacturing defects for a period of one year

from the date of purchase. Defective products should be returned prepaid to Ikelite. Ikelite will,

at its discretion, repair or replace such products, and will return to customer prepaid. All other

claims, of any nature, including but not limited to bulb failure are not covered. Except as men-

tioned above, no other warranty expressed or implied, applies to this Ikelite product.

IIKKEELLIITTEE U

UN

ND

DEERRW

WAATTEERR SSYYSSTTEEM

MSS

50 West 33rd Street

PO Box 88100

Indianapolis, IN 46208 USA

317-923-4523

w

ww

ww

w..iikkeelliittee..ccoom

m

Email [email protected]

1200-06-0707

Advertising