InFocus X1a - Manual (Page 18)

18
VESA connection
If your video device has a 15-pin VGA output, plug one end of the included
computer cable into the VGA connector on your video source. This connec-
tor may be labeled “To Monitor” on the video source. Plug the computer
cable into the Computer In connector on the projector.
Use the A/V cable’s red and white audio connectors as described on the
previous page (the yellow connectors on the A/V cable are not used).
Component video connection
If your HD video device has component connectors, an optional Compo-
nent to VESA adapter can be used. Plug the component cable into the video
device. Plug the other end of the component cable into the adapter and plug
the adapter Computer in (for VESA) connector. Use the A/V cable’s red
and white audio connectors as described on the previous page (the yellow
connectors on the A/V cable are not used).
Component offers the highest quality video output.
Connect the power cord to the Power connector on the side of the projector
and to your electrical outlet.
NOTE : Always use the power cord that shipped with the projector.
connect computer and
A/V cables
connect via Component to VESA adapter
Component
to VESA
and A/V cables
A/V cables
connect power cable