Patch upgrade, Os/application upgrade – Intel 1520 User Manual
Page 70
58
Intel NetStructure Cache Appliance Administrator’s Guide
Patch upgrade
After you press Ctrl-X to proceed, the CLI displays this message:
Installing The Patch. Please Wait...
The server transfers the application upgrade
tar.gz
(typically less than 10
MB). When the transfer is complete, the CLI displays this message:
Ftp Fetching Successful
The appliance starts to install the upgrade. The CLI displays this message:
Patch Installation In Progress. Please Wait...
Once the upgrade is installed, the CLI displays this message:
Patch Installation Successful
Once the upgrade is complete, the system automatically reboots, then the CLI
displays this message:
Final Message: Upgrade Complete.
Intel (r) NetStructure (tm) 1520 Cache is rebooting.
Please wait 2-3 minutes for an active console login.
Continue to use the appliance as before. If the upgrade requires you to reset the
application, you are warned in an upgrade message.
OS/Application upgrade
After you press Ctrl-X to proceed, the CLI displays the message:
Upgrading To The New OS. Please Wait...
The server transfers the application image upgrade file tar.gz (typically 310 MB).
When the transfer is complete, the CLI displays this message:
Ftp Fetching Successful
The appliance begins preparing the secondary disk, and the CLI displays this
message:
Disk Preparation in Progress. Please Wait...
Once the disk is prepared, the CLI displays this message:
Disk Preparation Successful
Next, reboot the system. After the system has finished rebooting, follow the
procedures in Starting the system for the first time in chapter 2.
Running a different version of the appliance software
You can switch between the two different versions of the software.
▼ Running a different version of the appliance software
1
Select the main menu, and press Enter.
2
Select versions, and press Enter.
3
Select switch, and press Enter. Doing so displays a list of versions. If no other
versions exist, a message displays indicating such.
4
Select the version you want to run, and press Enter.