Intel SERVER BOARD S5520HC - Manual (Page 6)

6
• Cables (one each):
o Front Panel Cable (baseboard header to front panel)
o USB Cable (USB header to chassis front panel)
o Adapter Cable providing two additional SATA power connectors
o AC power cord is only included in SC5650DPNA
• Chassis intrusion switch assembly
• Five Bumpers for installing Intel
®
Server Board S5520SC, S5500HCV, and S5500BC.
• The chassis is designed to work with Intel ® Xeon ® processor 5500 series with 95W maximum power, and is
compatible with boxed STS100C (Combo) or STS100A (Active) heat sink.
8)
The production Intel
®
Server Chassis SC5650BRP SKU is compatible with the Intel
®
Server Board S5520SC,
S5500HCV, and S5500BC. It includes:
• Redundant (1+0) PMBus-compliant 600W high efficiency PFC power supply with dual line cord support (full
redundancy requires additional 600W module purchased separately)
• Three non-redundant fixed cooling fan with ducting
• Support for six tool-free non hot-swap hard drives. Upgradeable to hot swap SAS/SATA 6-drive bay.
• Quick Start User’s Guide
• Cables (one each):
o Front Panel Cable (baseboard header to front panel)
o USB Cable (USB header to chassis front panel)
o Adapter Cable providing two additional SATA power connectors
o AC power cord is only included in SC5650BRPNA
• Chassis intrusion switch assembly
• Five Bumpers for installing Intel
®
Server Board S5520SC, S5500HCV, and S5500BC.
• The chassis is designed to work with Intel ®
Xeon
®
processor 5500 series with 95W maximum power, and is
compatible with boxed STS100C (Combo) or STS100A (Active) heat sink.
9)
The Intel
®
Server System SC5650HCBRP includes:
• Intel ® Server Board S5520HC pre-installed in the Intel ® Sever Chassis SC5650BRP
• Expander-based
Intel
®
Hot Swap Drive Bay AXX6DRV3GEXP pre-installed with cooling and mounting kit
(APP3HSDBKIT) in the Intel
®
Server Chassis SC5650BRP (Require SAS add-in card or SAS module
purchased separately)
• Redundant (1+0) PMBus-compliant 600W high efficiency PFC power supply with dual line cord support (full
redundancy requires additional 600W module purchased separately)
• Three non-redundant fixed cooling fan with ducting
• Quick Start User’s Guide and Configuration Label
• Cables (one each)
o Front Panel Cable (baseboard header to front panel, pre-routed))
o USB Cable (USB header to chassis front panel, pre-routed)
o Adapter Cable providing two additional SATA power connectors (in cable kit)
o AC power cord is only included in SC5650HCBRPNA
• Chassis intrusion switch assembly (pre-routed)
• The server system is designed to work with Intel
®
Xeon
®
processor 5500 series with 95W maximum power,
and is compatible with boxed STS100C (Combo) or STS100A (Active) heat sink.
10) The Intel ® Workstation System SC5650SCWS includes: