Infinite Peripherals IP-BC-BT - Manual (Page 9)

.
.
.
.
.
.
..
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Infinite Peripherals, Inc. Page 8
www.ipcprint.com
IP-BC-BT User’s Manual v1.01
Setting Up Scanner
The IP-BC-BT scanner requires Bluetooth ® enabled PDA or Smartphone to
communicate using Bluetooth ® technology.
Depending on your device type the steps for setting up or pairing your
device to the IP-BC-BT scanner will vary slightly but the overall process
should be similar to the steps below.
1. First step is to pair IP-BC-BT to your PDA or Smartphone. This is
usually done using the device’s Bluetooth ® Manager.
2. When ready, place the scanner in discovery mode by pressing the
scan button.
3. On your PDA or Smartphone, select the option to add new
Bluetooth ® devices. The actual command option will depend on
your device type and could be one of the following:
a. BlackBerry OS: [Add Device]
b. Pocket PC OS: [Explore a Bluetooth ® device]
c. Palm OS: [Add Device]
d. Windows Mobile: [New Partnership]
Or it could be something similar to one of the above options. Refer
to your device user manual for details on pairing Bluetooth
®
devices.
4. Select device named “Cordless”.
5. Use 0000 as the Bluetooth ® Passkey when requested.
6. Save and exit.
If the steps above have been successful, the scanner and your PDA or
Smartphone are now paired with each other and ready to use Bluetooth
®
communications.