InFocus F C J 65V - Manual (Page 9)

English
7
Thickness of material (mm)
Material to be cut Material quality No. 11 No. 12 No. 15 No. 16 No. 21 No. 22 No. 41
Below
General lumber 10 – 55
20
10 – 55 5 – 40 10 – 65
Lumber
Below
Plywood 5 – 20
10
5 – 20 3 – 15 5 – 20
Below
Iron plate Mild steel plate 3 – 6
3
Below
Nonferrous metal Aluminium copper, brass 3 – 10
3
Phenol resin,
5 – 15
Below
5 – 15
Below
5 – 15
melamine, resin, etc. 5 6
Plastics Vinyl chloride,
5 – 20
Below
5 – 15
Below
5 – 20 3 – 15 5 – 20
acryl resin, etc. 10 5
Foamed polyethylene,
10 – 55 3 – 30 5 – 30 3 – 20 10 – 55 3 – 40 10 – 65
foamed styrol
Cardboard, corrugated
10 – 55 3 – 30 10 – 55 3 – 40 10 – 65
paper
Pulp Below
Hardboard 3 – 20
5
Below
Fiberboard
5
Information concerning airborne noise and vibration
The measured values were determined according to
EN60745 and declared in accordance with ISO 4871.
Measured A-weighted sound power level: 96 dB (A)
Measured A-weighted sound pressure level: 85 dB (A)
Uncertainty KpA: 3 dB (A).
Wear ear protection.
The typical weighted root mean square acceleration
value: 12.7 m/s
2 .
Table 1 List of Appropriate blades
Blade No.
Note
⅜ The minimum cutting radius of No. 21, No. 22 and No. 41 blades is 100 mm.
NOTE:
Due to HITACHI’s continuing program of research and
development, the specifications herein are subject to
change without prior notice.
IMPORTANT
Connect connection of the plug
The wires of the mains lead are coloured in accordance
with the following code:
Blue: -Neutral
Brown: -Live
As the colours of the wires in the main lead of this tool
may not correspond with the coloured markings
identifying the terminals in your plug proceed as follows:
The wire coloured blue must be connected to the terminal
marked with the letter N or coloured black. The wire
coloured brown must be connected to the terminal
marked with the letter L or coloured red.
Neither core must be connected to the earth terminal.
NOTE
This requirement is provided according to BRITISH
STANDARD 2769: 1984.
Therefore, the letter code and colour code may not be
applicable to other markets except The United Kingdom.