Intel GA-945PL-S3P - Manual (Page 11)

Hardware Installation - 11 -
English
Rear Panel I/O Š 1 PS/2 keyboard port
Š 1 PS/2 mouse port
Š 1 parallel port
Š 1 serial port
Š 4 USB 2.0/1.1 port
Š 1 RJ-45 ports
Š 6 audio jacks (Line In / Line Out / MIC In/Surround Speaker Out (Rear
Speaker Out)/Center/Subwoofer Speaker Out/Side Speaker Out)
I/O Control Š IT8718 chip
Hardware Monitor Š System voltage detection
Š CPU temperature detection
Š CPU / Power / System fan speed detection
Š CPU warning temperature
Š CPU / Power / System fan failure warning
Š Supports CPU Smart Fan function
BIOS Š 1 4 Mbit flash ROM
Š Use of licensed AWARD BIOS
Š PnP 1.0a, DMI 2.0, SM BIOS 2.3, ACPI 1.0b
Additional Features Š Supports @BIOS
Š Supports Download Center
Š Supports Q-Flash
Š Supports EasyTune (Note 4)
Š Supports Xpress Install
Š Supports Xpress Recovery2
Š Supports Xpress BIOS Rescue
Bundle Software Š Norton Internet Security (OEM version)
Form Factor Š ATX form factor; 30.5cm x 19.3cm
(Note 1) Enable use of a Core TM 2 CPU with 1333 MHz FSB through overclocking. You must install the
FSB 1333 MHz Core TM 2 CPU with DDRII 533 (or above) memory module(s).
(Note 2) To use a DDRII 667 memory module on the motherboard, you must install a FSB 800 MHz
(or above) CPU.
(Note 3) Some memory configurations will result in memory frequency being reduced from the original
frequency. (Please refer to to Page 15 for more information.)
(Note 4) EasyTune functions may vary depending on different motherboards.