Infiniti M45 - Manual (Page 34)

To Manually Change Air Flow:
N Press the DRIVER MODE button to select the air flow location
when in AUTO mode.
N When in DUAL mode, the passenger can control his/her own air
flow location by pressing the PASSENGER MODE button.
Air flows from center and side vents.
Air flows from center and side vents, plus foot outlets.
Air flows mainly from foot outlets.
Air flows from the front defroster and foot outlets.
Notes:
N
N
AUTO UPPER VENT Button
Press to redirect airflow to reduce force against the driver’s and front-
passenger’s upper body. The indicator light will illuminate on the
AUTO UPPER VENT button when ON.
To Turn ON/OFF Front Defroster:
1 Press the Front Window Defroster button to turn it ON. The indicator
light on the button will illuminate.
Notes:
N Pressing the Front Window Defroster button provides the best possible
defrost action. This is the preferred method for quickly defrosting the window
(rather than choosing the front defroster and foot outlets in Manual Air Flow
control mode
, which is less efficient).
N When you press this button, you may hear a click noise from the engine
area. This is normal. The Air Conditioner compressor is being activated. With
A/C ON, moisture is pulled from the air, helping to defrost the inside of the
windows more quickly.
2 Press UP or DOWN on the DRIVER Temperature button to set the
desired temperature.
3 Press the + Fan Speed Control button to set fan speed to maximum.
4 Press the Front Window Defroster button again to turn it OFF.
To Turn ON/OFF Rear Defroster:
1 Press the Rear Window Defroster button to turn it ON. The
indicator light will illuminate on the button.
2 Press the button again to turn it OFF. Or, it will turn OFF
automatically after approximately 15 minutes.
32