Impex WM 1407 - Manual (Page 7)

STEP 3 (See Diagram 3)
A.) Attach the Upper Frame (#10) onto the Rear Vertical Frame (#9). Align the holes and secure
it with five M10 x 5/8” Allen Bolts (#40) and
∅
¾” Washers (#53).
B.) Attach the two Bow Frames (#7) to each side of Rear Vertical Frame. Align the holes and
secure them together with two M10 x 5 ¾” Allen Bolts (#47), four
∅
¾” Washers (#53), and
two M10 Aircraft Nuts (#50).
C.) Attach one Swivel Pulley Bracket (#8) to each Bow Frame. Secure each Bracket with one
M12 x 5 1/8” Allen Bolt (#48),
∅
1” Washer (#52), and M12 Aircraft Nut (#51).
D.) Attach one Upper Swivel Pulley Bracket (#13) to the Upper Frame (#10). Secure it with one
M10 x 2 3/8” Allen Bolt (#43), two
∅
¾” Washers (#53), and one M10 Aircraft Nut (#50).
Repeat the same step to install the other side.
6