Installing the front panel, Wiring your car cd deck – Insignia NS-C4113 User Manual

Page 8

Advertising
background image

8

Insignia NS-C4113 Car CD Deck with USB Port

www.insignia-products.com

Installing the front panel

To install the front panel:

1 Put notch A onto shaft B, the press gently

into the right side of the head unit.

2 Slide the front panel to the right, then onto

the shaft on the left side of the head unit,
then rotate the front panel up until it closes.

To remove the front panel:

1 Press the REL button on the front panel. The

panel rotates outwards on the bottom hinges.

2 Slide the front panel to the right and take it off

the hinge on the left side of the head unit,
then remove the front panel.

Wiring your car CD deck

Connect the wires to the back of the CD deck as
shown in the following illustration. You must wire
the main wiring harness prior to installing the CD
deck into the dashboard.

Shaft B

Notch A

Caution

Be very careful to wire the main wiring harness correctly. If
you wire it incorrectly, or fail to properly insulate the
connections, you could damage the player, your speakers,
your car, or all of the above.

Antenna

To power antenna

Right rear speaker

Right front speaker

Left rear speaker

Left front speaker

Ignition key

Memory backup 12V

Negative ground

Left (white)

Right (red)

Left (white)

Right (red)

Front RCA (dark grey)

Rear RCA (light grey)

Red

Yellow

Black

- Green/Black

+ Green

- White/Black

+ White

- Violet/Black

+ Violet

- Grey/Black

+ Grey

Blue

Choke
box

Hole for
mounting
bolt

Subwoofer (brown)

Advertising