Intermec CN2G - Manual (Page 21)

Chapter 1 — Using the CN2G Handheld Computer
CN2G Handheld Computer User’s Manual 9
If your CN2G does not resume after pressing the Power key,
your battery may be too low to supply power. Replace or charge
the battery. If replacing or charging the battery does not solve
the problem, see “Booting the CN2G” on page 73.
To turn off the CN2G
• Press and hold the Power key for approximately 2 seconds,
and then release it. The CN2G turns off.
Using the Touch Screen
The CN2G has a color touch screen display. The screen is 240 x
320 pixels. The desktop is 240 x 320 pixels and the taskbar is
240 x 20 pixels. In addition, the screen supports Unicode
characters, user-programmable fonts, and bitmap graphics.
CN2G Start Screen
Using the Touch Screen and Stylus
Your CN2G has a stylus for selecting items and entering
information. Use the stylus in place of a mouse.
Desktop
Taskbar