iSimple IPOD PGHTY1 - Manual (Page 7)

5
6. iPod Operation
Entering Mode Select Menu
Press the “AM/SAT” button to switch to AM then again to switch back to SAT.
Turn the TUNE KNOB or press
“TUNE ▲” to scroll through the available sources.
Once “IPOD” is displayed, press PRESET 3 to select the displayed mode.
Next Track
Turn the TUNE KNOB clockwise or press
“TUNE ▲” to advance to the next track.
Previous Track
Turn the TUNE KNOB counter-clockwise or press
“TUNE ▼” to move back to the previous
track.
Fast Forward
Press PRESET 2 repeatedly to fast forward the song that is playing.
Rewind
Press PRESET 1 repeatedly to rewind the song that is playing.
Entering “BROWSE” Menu / Select
Press PRESET 3 to enter the browse menu or to make a selection while in the browse
menu.
6. If connecting the Satellite Radio tuner (SCC1 sold separartely), make the folllowing
connections before connecting the PXAMG to the vehicle. Plug the black end of the 3
foot PXAMGSR (8-Pin mini-din to 8-Pin mini-din; sold seperately) into the second port
(closest to the dipswitches) on the Media Gateway. If you are installing the Satellite
Radio Tuner with the HDRT, connect the PXAMGSR cable to the port farthest from the
dipswitches. Connect the gray end of this cable into the Satellite Radio tuner.
7. Plug in the male connectors on the PGHTY1 harness into the 12-pin port on the
back of the radio. Next, connect the factory 12-pin harness (if present) into the female
connector on the PGHTY1 harness. Be sure to make a firm connection but do not force
it. Plug the Black micro-fit 24-pin connector on the PGHTY1 harness into the PXAMG
Media Gateway box.
8. To complete the installation secure the Media Gateway (PXAMG) and HD Radio
tuner (HDRT if equipped) into the cavity in the dash behind the radio. Be sure that the
cables and interface modules are not near moving parts or sharp metal edges as they
may damage the cables. To prevent rattling noises inside the dash, use zip ties, tape,
or other fasteners to mount the interfaces securely.
9. With all connections made, reconnect the vehicle’s battery, insert the key into the
ignition, and turn the vehicle on. Check for proper operation of the Media Gateway and
HD Radio tuner before reinstalling the factory dash panels.
10. Note: The first time you access the Gateway, your radio may display “DEV INIT”
while the device is initializing. If this is displayed, please wait one minute then cycle the
ignition off and on. Then access SAT mode again to begin normal gateway operation.