Impex NS-1101U User Manual
Magnetic-resistance upright bike ns-1101u, Model ns-1101u, Impex
Advertising
Table of contents
Document Outline
- BEFORE YOU BEGIN...................................................................................…. 1
- IMPORTANT SAFETY NOTICES..................................................................…. 2
- HARDWARE PACK……….....…....................................................................…. 4
- ASSEMBLY INSTRUCTIONS........................................................................…. 6
- EXPLODED DIAGRAM………………………………………………………………. 13
- PARTS LIST...................................................................................................… 14
- OPERATING NOTES………………………………………………………………… 15
- WARRANTY.................................................................................................…. 19
- ORDERING PARTS.....................................................................................….. 19
- A.) Attach the Handle (#2) to the Front Post (#9).
- B.) Insert the two Pulse Sensor Wires (#3) through the open slot on Front Post and then pull up and out of the Front Post.
- C.) Clamp the Handle to the Front Post. Secure it with T-shaped Lock Knob (#8), Spacer (#7), and the Clamp Cover (#6).
- A.) Connect the Middle Computer Wire (#4) to the computer wire.
- B.) Connect the two Pulse Sensor Wires (#3) to the sensor wire from Computer (#1).
- C.) Slide the Computer onto the Front Post (#9). Secure it with one M5 x 1” Philips Screw (#5).
- MUSCLE TONING
- WEIGHT LOSS