i. Tech Dynamic II - Manual (Page 5)

14 3
3
Charging Your Headset
(Fig. 2)
The Headset comes with a built-in rechargeable battery. Prior to
using the headset for the first time, it is recommendable to charge
the battery fully.
Troubleshooting
If you are unable to connect your headset and mobile handset,
please try the following:
• Ensure your headset is turned off and is properly charged.
• Ensure the headset is paired with your mobile handset.
• Ensure your mobile handset’s Bluetooth feature is activated.
Please refer to your mobile handset user guide for specific
instruction.
• Ensure the headset is within a maximum of 10 metres of your
mobile handset and there are no obstructions, such as walls
or other electronic devices in between.
If the above steps do not solve your problem, please recharge the
headset and remove your mobile handset’s battery for a while.
The i.Tech Arrow II Headset is compliant with and adopts the
Bluetooth Specification 1.2. However, interoperability between
the device and other Bluetooth-enabled products is not
guaranteed because it depends on compatibility. For more
information on the compatibility between the device with other
Bluetooth-enabled products, please check with the manufacturer
or browse
http://www.itechdynamic.com
Charger Plug
Charging
Socket