IBM POWER 730 - Manual (Page 28)

IBM Europe, Middle East, and Africa Hardware
Announcement ZG10-0214
IBM is a registered trademark of International Business Machines Corporation 28
Noise level and sound power (Preliminary data)
Power 710: 6.6 bels (Operating and idling)
Power 730: 6.6 bels (Operating and idling)
EMC conformance classification: This equipment is subject to FCC rules and shall
comply with the appropriate FCC rules before final delivery to the buyer or centers of
distribution.
• U.S.: FCC Class A
• Europe: CISPR 22 Class A
• Japan: VCCI-A
• Korea: Korean Requirement Class A
• China: People's Republic of China commodity inspection law Class A
Homologation -- Telecom environmental testing (Safety and EMC):
Homologation approval for specific countries has been initiated with the IBM
Homologation and Type Approval (HT&A) organization in LaGaude, France. This
Power Systems model and applicable features meet the environmental testing
requirements of the country telecom and have been designed and tested in
compliance with the Full Quality Assurance Approval (FQAA) process as delivered
by the British Approval Board for Telecom (BABT), the U.K. Telecom regulatory
authority.
Product safety/Country testing/Certification
• UL 60950 Underwriters Laboratory, Safety Information
• CSA C22.2 No. 60950-00, Canadian Standards Association
• EN60950 European Norm
• IEC 60950, Edition 1, International Electrotechnical Commission, Safety
Information
• Nordic deviations to IEC 60950-1 1st Edition
General requirements: The product is in compliance with IBM Corporate Bulletin
C-B 0-2594-000 Statement of Conformity of IBM Product to External Standard
(Suppliers Declaration).
Hardware requirements
Power 710/730 minimum system configuration
The Power 710 offers 4-, 6-, and 8-core configurations with one processor module.
The Power 710 can contain up to 64 GB of system memory (32 GB maximum per
memory riser card).
The Power 730 offers 8-, 12-, and 16-core configurations with two processor
modules. The Power 730 can contain up to 128 GB of system memory (32 GB
maximum per memory riser card).
Both the Power 710 and Power 730 offer four PCIe Low Profile adapters, and three
or six SFF HDDs/SDDS and one or two media devices, depending on the storage
backplane selected.
Each Power 710/730 initial order must include a minimum of the following items:
• One system central electronics complex (CEC) enclosure with the following items:
– One power cord (#6458, #6460, #6469-#6478, #6487-#6494, #6496,
#6577, #6580, #6651, #6653-#6660, #6665, #6669, #6671, #6672,
#6680)
– One Language Group, Specify (#9300 or #97xx)
• For the Power 710, choose one processor module from: