IMC Networks iMcV-PSE-MidSpan - Manual (Page 7)

4
LED Indicators
The iMcV-PSE-MidSpan features device-specific and several diagnostic LEDs. The
LED functions are as follows:
PWR FAIL
OVER CUR
PWR
0 CUR
PoE ENB
15 W
4W
7W
Glows red when an overcurrent or internal fault
is detected within the PSE-MidSpan PoE circuit.
Glows red when an overcurrent condition lasts
for more than 60 ms after power up and/or
glows red when an over temperature condition
occurs.
Glows green when power is being supplied to
the PSE-MidSpan.
Glows red when there is no device connected
to the PSE-MidSpan. Glows red when the
device connected to the PSE-MidSpan is NOT a
valid PD. The LED is off when the PSE-
MidSpan detects a valid PD.
Glows green when PoE functionality is enabled.
Glows green when Powered Device consumes
12.95 watts to 15 watts of power (CLASS0 PD).
Glows green when Powered Device consumes
3.84 watts to 4 watts of power (CLASS1 PD).
Glows green when Powered Device consumes
6.49 watts to 7 watts of power (CLASS2 PD).