Impression Products MAX-300 - Manual (Page 14)

13
Specifications
Note: Standards are subject to change without prior notice.
Accessories
One (1) Set of Earphones
One (1) AC Power Adapter
Two (2) AA rechargeable Batteries
One (1) Soft Bag
One (1) Line Out Cord
Laser Wave Length 780nm
Output Power of Earphone 10mW+10mW (load 16oms)
Output Level of Line 0.5V+0.2V (load 10K ohms)
Audio D/A 1 Bit
Signal-to-noise Ratio >/=85dB (Line)
Distortion <0.05% (Line)
Operation Temperature +5C ~ +35C
Frequency Response 20 ~ 20000Hz (+2dB)
Dimension 145mm x 130mm x 28mm
Weight 250g (not including batteries)
Power Source DC5V (Use AC power adapter MDC 505 A)
DC3V (Use two AA alkaline batteries)
DC2.4V (Use two supplied Ni-MH / Ni-CD
rechargeable batteries.)