Bottom view – InFocus IN5318 User Manual
Page 13
User’s Manual
Bottom view
I
TEM
L
ABEL
D
ESCRIPTION
S
EE PAGE
:
Raise and rotate the feet to change and fine tune
the angle of the projector.
1.
Leveling/Elevator Feet
Only use with an InFocus ceiling mount system (p/n PRJ-MNT-UNIV).
See your InFocus dealer or
2.
Ceiling support holes
Note:
When installing, ensure that you use only UL Listed ceiling mounts.
For ceiling installations, use approved mounting hardware and M4 screws with a maximum screw
depth of 6 mm (0.23 inch).
The construction of the ceiling mount must be of a suitable shape and strength. The ceiling mount
load capacity must exceed the weight of the installed equipment, and as an additional precaution
be capable of withstanding three times the weight of the equipment over a period of 60 seconds.
– 6 –