Intel DG41MJ - Manual (Page 36)

Intel Desktop Board DG41MJ Product Guide
36
Connecting a Standard SATA Drive
You can use the standard SATA data cable supplied to connect a standard SATA drive
to the Desktop Board.
For correct cable function:
1. Observe the precautions in “Before You Begin” on page 23.
2. Attach one end of the SATA data cable to one of the SATA connectors on the board
(Figure 16, A) and attach the other end of the cable to the SATA drive
(Figure 16, B).
Figure 16. Using the Standard SATA Cable