Insignia NS-A1000 - Manual (Page 10)

10
Insignia NS-A1000 Car Stereo Amplifier
www.insignia-products.com
Stereo mode connections
Mono mode connections
Tri-mode operation
Tri-mode operation lets you connect a subwoofer to the bridged /
mono terminals, while (additional) main speakers are connected to
the stereo channels. Leave the crossover (subwoofer) switch on Full
position for this mode.
Refer to the chart below to select the correct value of capacitor or
inductor for the frequency you want.
The chart applies to all channel configurations, even though the
illustration below is for a 2 channel amplifier.
Frequency Inductor Capacitor
80 Hz 7.5 mH 470 uF
100 Hz 6.5 mH 330 uF
120 Hz 5.5 mH 330 uF
150 Hz 4 mH 220 uF
S P E A K E R O U T P U T
R CH LCH
M O NO
12V R EM GND
P O W E R I N P U T
FU S E