Interquartz IQ560E - Manual (Page 10)

10
EXAMPLE: TO REDIAL LAST NUMBER
1. Lift HANDSET, or press HANDSFREE or HEADSET,
2. Press REDIAL (telephone redials last number).
EXAMPLE: DIRECT REDIAL OF LAST NUMBER
1. Lift HANDSET, or press HANDSFREE or HEADSET,
2. Dial a number, but find it engaged,
3. Press REDIAL; the telephone will automatically clear and re-connect the
line. The number will then be re-dialled.
PAUSE FUNCTION
The Pause command may be needed if your phone is connected to certain types of
PABX or to any network where a two second pause is required (e.g. between internal
and external dial tones).
For manual dialing:
1. Lift HANDSET,
2. Dial any digits required before the pause,
3. Press PAUSE (telephone waits for 2 seconds before proceeding),
4. Dial the remaining digits.
For memory usage (storage procedure) to cause the telephone to pause for 2
seconds in a sequence:
1. Lift HANDSET, or press HANDSFREE or HEADSET,
2. Press STORE,
3. Dial digits required before the pause,
4. Press PAUSE,
5. Select and press desired MEMORY KEY,
6. Replace HANDSET or press HANDSFREE or HEADSET.
IQ560E MANUAL ON-LINE VERSION_070518.p65 2007/5/18, ¤W¤И 09:56 10