InFocus HDTV Receiver - Manual (Page 3)

Component
Y Pb/Cb Pr/Cr
Composite S-video
Digital
Optical
Analog Video Out
Digital
Coax
Audio Out
L R
Stereo Surround Sound
Digital Video Out
HDMI
DVI
HDTV Receiver Connector Panel
Cable In
To TV/VCR
Setup Requirements
connector panel may vary from actual product
Projector Connector Panel
M1-DA
Composite
S-video
L
R
VGA RS-232
connector panel may vary from actual product
Connect an HDTV receiver to a projector (w/o component) using a component video cable
1
Plug the component video
cable into the component
ports on the HDTV receiver.
2
Connect the other end of the
cable to the M1 to component
adapter. Connect M1 adapter
to the M1-A port on the projector.
3
Power on the projector, then the
HDTV receiver. You are ready to
watch high definition television!
HDTV receiver with component video-out ports
Projector without component video-in ports
Connect to surround
sound receiver to
receive surround sound
M1-DA
Composite
S-video
L
R
VGA RS-232
Connect to external audio
receiver, speakers or
projector (if supported).
M1 to component adapter (InFocus part #SP-M1-ADPT)
Video
M1 to component adapter
(optional accessory) We recommend connecting the HDTV receiver to an external
sound system to provide the best audio experience. *
*
Component video cable (red, green, blue male RCA)
STANDBY
Component
Y Pb/Cb Pr/Cr
Composite S-video
Digital
Optical
Analog Video Out
Digital Coax
Audio Out
L R
Stereo Surround Sound
Digital Video Out
HDMI
DVI
Cable In
To TV/VCR
Video
component video cable
(3rd party optional accessory)
component video connectors
3