Proper use of seat belts & shoulder straps – InStep 11-EZ256 User Manual

Page 5

Advertising
background image

5

To engage rear brakes:

Step lightly on the levers next to the rear wheels
until the cogs of the brakes engage the cogs of the
wheel. Repeat on other side.To release brake,
lift levers using your toe until cogs disengage
(Figure G).

Proper use of seat belts & shoulder
straps:

WARNING:

Avoid Serious Injury. Always use

seat belts.

1. Place child in seat. Make sure T-shield is

between the child’s legs.

2. When child is seated, place shoulder straps

over the child’s shoulders.

3. Slide waist straps through lower loops of shoul-

Lder straps, bring lap belt ends together and clip
into place around child’s waist. Adjust waist and
shoulder straps for snug fit (Figure H).

To recline seat:

To fully recline, unhook buckle on back of the seat.
(Figure I).

To place seat in upright position, push seat forward
and reconnect buckle located on back of seat.

To adjust the recline position, adjust the slide on
the strap.

WARNING:

Child may slip into leg openings

and strangle. Never use in a reclined carriage posi-
tion unless T-shield and shoulder strap have been
readjusted to the new seat position.

G

Rear
Brakes

H

Shoulder Straps

Shoulder
Strap
Adjustment
Slides

Waist

Buckle

Adjustment

T-Shield

Waist

Belt

Waist

Belt

I

Advertising