Infinite Peripherals PRO 4 - Manual (Page 21)

. . . . . . . . . . . . . . . . . . . .
Infinite Peripherals, Inc.
www.ipcprint.com Page 21
Linēa-pro 4 User Manual v1.00
Troubleshooting
Barcode Scanning
If you’re having problems scanning barcodes refer to the table below for
possible causes.
Item Problem Possible Cause
1
Scanner does not
turn On.
* Linēa-pro 4 battery is to low.
* Linēa-pro 4 not turned on by software.
* Faulty scan engine.
2
No barcode data
returned during
scanning.
* Unreadable barcode.
* Linēa-pro 4 battery is to low.
* Faulty scan engine.
* Software decode incorrectly.
3
Partial barcode
data returned
during scanning.
* Unreadable barcode.
* Linēa-pro 4 battery is to low.
* Faulty scan engine.
* Software decode incorrectly.
4
Unable to perform
multi-scanning. * Multi-scan mode not enabled.
* Software does not support multi-scans.
5
Unable to hear
scanner beep. * Sound mode not enabled.
* Linēa-pro 4 battery is to low.
6
Unable to scan
certain barcodes
symbols.
* Barcode type is not enabled.
* Barcode type is not supported.
Table 6