Overview of a completed setup – InSinkErator F-201R User Manual

Page 3

Advertising
background image

To reduce the risk associated with ingestion of contaminates due to use with water that is
microbiologically unsafe or of unknown quality, do not use with water that is microbiologically
unsafe or of unknown quality without adequate disinfection before or after the system.

3

To reduce the risk associated with property damage due to water leakage:

• Protect filter from freezing. Drain filter when temperatures drop below 40°F (4.4°C).

• Do not install if water pressure exceeds 120 psi (828 kPa). If your water pressure

exceeds 120 psi, you must install a pressure limiting valve. Contact a plumbing
professional if you are uncertain how to check your water pressure.

• Do not install where water hammer conditions may occur. If water hammer

conditions exist you must install a water hammer arrester. Contact a plumbing
professional if you are uncertain how to check for this condition.

• Do not install on hot water supply lines. The maximum operating water temperature

of this filter system is 100°F (38°C).

• The disposable filter cartridge must be replaced every twelve months or at the

specified service cycle.

• Read and follow instructions before installation and use of this system.

OVERVIEW OF A COMPLETED SETUP

Advertising