Product safety information, Product specifications, Installation and lubrication – Ingersoll-Rand 7802RA User Manual
Page 3: Parts and maintenance
04580452_ed4
EN-1
EN
Product Safety Information
Intended Use:
These Drills are designed for drilling, valve guide reaming and cylinder honing operations in the
automotive industry.
For additional information refer to Air Drill Product Safety Information Manual Form 04580353.
Manuals can be downloaded from www.irtools.com.
Product Specifications
Installation and Lubrication
Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain condensate from
valve(s) at low point(s) of piping, air filter and compressor tank daily. Install a properly sized Safety Air Fuse
upstream of hose and use an anti-whip device across any hose coupling without internal shut-off, to prevent
hose whipping if a hose fails or coupling disconnects. See drawing 16573180 and table on page 2.
Maintenance frequency is shown in circular arrow and defined as h=hours, d=days, and m=months. Items
identified as:
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled, degreased and parts
be separated by material so that they can be recycled.
The original language of this manual is English.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll-Rand Office or Distributor.
Model(s)
Handle
Type
Free
Speed
Chuck
Capacity
Sound Level dB (A)
(ISO15744)
Vibration
Level
(ISO8662)
rpm
inches (mm)
Pressure (L
p
)
“K
pA
”=3dB(A)
Power (L
w
)
“K
wA
”=3dB(A)
m/s²
7802A
Pistol
2000
3/8" (10)
83.0
94.0
0.2
7803A
Pistol
500
1/2" (13)
83.0
94.0
0.3
7802RA
Pistol
2000
3/8” (10)
83.0
94.0
0.4
7803RA
Pistol
500
1/2” (13)
83.0
94.0
0.3
1.
Air filter
6.
Thread size
2.
Regulator
7.
Coupling
3.
Lubricator
8.
Safety Air Fuse
4.
Emergency shut-off valve
9.
Oil
5.
Hose diameter
10. Grease - through fitting