Impex IGS 16 - Manual (Page 15)

STEP 8 (See Diagram 8)
A.) Insert the Right Butterfly Arm (#6) into the pivot on the Front Vertical Beam (#3). Secure it
with one M10 x ¾” Allen Bolt (#97), Ø ¾” Spring Washer (#115), and Ø 1 ½” x Ø ½”
Washer (#122).
B.) Insert the Butterfly Swivel Handle (#8) into the pivot tube on the Right Butterfly Arm (#6).
Secure the bottom with a Ø 1” Clip Ring (#94).
C.) Repeat the above steps to install the other side.
DIAGRAM 8
14