Iqua PHF-301 - Manual (Page 9)

8
Switching on and off
To switch on the miniUFO:
• Press and hold the button until the blue light starts blinking (1 blink every 3
seconds).
• To switch off the miniUFO, press and hold the button until the lights stop blinking.
Pairing the miniUFO and a mobile phone
Pairing is the process of linking your miniUFO to a Bluetooth-enabled mobile phone. Once this
process is over, you will be able to use the miniUFO with the mobile phone you have paired it
to. If you want to use the miniUFO with another mobile phone, you must repeat the pairing
process again. Even though the miniUFO can be paired with up to 8 compatible phones, it can
only be connected to one phone at a time.
1. Press and hold down the button until you hear a sound and the blue and red lights
start flashing in turns.
2. Release the button. The miniUFO is now in pairing mode and is waiting for your mobile
phone to contact it.
3. Complete the pairing with your mobile phone. Please refer to your mobile phone's
manual for details on how to search and pair. Once the mobile phone has found the
handsfree device, the phone will show Iqua miniUFO on its display. In order to pair with
the phone, enter the PIN code of the miniUFO, which is 0000.
4. After it has paired, the miniUFO will automatically connect to your mobile phone. Once
they have been successfully paired and connected, you will hear a sound and the blue
light will start flashing (3 flashes every 2 seconds).
PHF-301_miniUFO_UG_en.fm Page 8 Wednesday, April 12, 2006 11:49 AM